Для станка без центрального водоотвода, внешнее охлаждение передается на центральное внутреннее охлаждение через внутреннюю структуру рукоятки инструмента.. Внутреннее охлаждение в центре хорошо удаляет стружку., температура режущей кромки низкая, срок службы долгий, and the machining effect is good.
For the first use, oil shall be injected, and then the spindle shall be rotated
matters needing attention:
1. The new oil path tool handle can quickly realize the internal cooling function of the tool, which is simple and convenient to use.
2. Improve the iron cutting speed of the tool and effectively reduce the cutting edge temperature.
3. High pressure internal cooling can quickly remove iron filings and prolong the service life of the tool.
4. It is mainly used for internal cooling fried dough twist drills and abandoned fast drills.
5. The maximum allowable speed is 3000 rpm, and the allowable cooling hydraulic pressure is 1Mpa.